
The coffee table came from a first apartment, and it still sits four inches too low next to the sectional that replaced the old loveseat. One end table is honey oak, the other is an espresso-stained piece bought on clearance, and the third surface in the room is a stack of books under a lamp. Remotes, two water glasses, a charging cable, and a candle share about nine inches of usable top, and there is a pale ring near the corner that will not wipe away. Nothing in the room is broken, but a living room table set is exactly what the space has been missing, because the tables are the only furniture in there that never got chosen together.
Pull Your Living Room Together With One Coordinated Table Set
Our design team helps Bakersfield and Fresno families size coffee and end tables to real sofas, real rugs, and real great rooms. Shop coordinated occasional table sets with in-home measuring, professional delivery and setup, and local service long after the sale.
The reassuring part is that this is one purchase, not five. A coordinated living room table set fixes proportion, storage, and style consistency in a single decision, which is why so many rooms that felt unfinished suddenly photograph well after the tables change. At Urner’s, our furniture team walks Bakersfield and Fresno shoppers through sizing against their actual sofa, materials that survive their actual household, and finishes that hold up in valley sun. This guide covers what comes in a set and when a set is the right call, how to size tables to your sofa and floor plan, materials and finishes, style families, storage and lift top formats, quality and care, and seven sets worth shopping right now.
Key Takeaways
- A set solves consistency, not just cost: Buying coordinated pieces guarantees matching wood tone, finish sheen, hardware, and leg profile, which is the exact thing that goes wrong when tables are collected one at a time.
- Sizing beats styling: A coffee table should run roughly half to two thirds the length of your sofa and sit level with or just below the seat cushion, and no finish choice fixes a table that breaks those proportions.
- Material decides maintenance: Glass shows every fingerprint, natural marble etches from citrus and wine, and engineered wood with a durable topcoat is the most forgiving surface for a busy family room.
- Storage formats earn their space: Lift tops, lower shelves, drawers, and nesting pieces are how a small living room gets a work surface, a blanket home, and a remote drawer without adding another piece of furniture.
What a Living Room Table Set Includes and Why Buying as a Set Works

A living room table set is a coordinated group of occasional tables sold together. The most common configuration is three pieces: one coffee or cocktail table plus two matching end tables. Two-piece sets pair a cocktail table with a single end table, or two end tables, and larger occasional collections add a sofa table, a console, a chairside table, or a nesting piece designed to tuck beside a chair.
Buying as a set removes the variable that trips up most rooms. Wood tone is the obvious one, since two pieces described as brown by two manufacturers can be visibly different in the same lamplight. But finish sheen, hardware finish, edge profile, apron depth, and leg shape all have to agree for a room to read as intentional, and matching six variables across three separately purchased tables is genuinely hard.
When a Matched Set Is the Right Call
- Your seating is new or recently updated and the tables are the last piece to change.
- The room is open to a kitchen or dining area, so consistency across sightlines matters more.
- You want one delivery, one decision, and a finished room this month.
- Your existing pieces are mismatched and none of them is worth building around.
When a Mixed Approach Serves the Room Better
A fully matched set can read flat in a large room, especially when every surface shares the same wood, the same finish, and the same base. If your living room is generous, or if you already own one piece with real character, buy the set and then deliberately break it with a single contrasting accent table. A dark drum table next to a light wood set, or one aged metal piece in a room of warm oak, reads as collected rather than catalog-ordered. The rule is simple: one intentional contrast looks designed, three accidental ones look unplanned.
How to Size a Living Room Table Set to Your Sofa and Floor Plan
Proportion is where most living rooms go wrong, and it is entirely fixable with a tape measure. Start with length. A cocktail table should span roughly half to two thirds the length of your sofa. Shorter than half and it looks like a floating island, longer than two thirds and the room feels crowded even when the walkways are technically fine.
Height comes next, and it is the rule people break most often. The top of the coffee table should sit level with the sofa’s seat cushion or an inch or two below it. Set a table four inches lower and everyone in the room leans and reaches for a drink all evening, which is exactly the annoyance the inherited apartment table creates.
The Clearances That Make a Room Work
- Leave roughly 14 to 18 inches between the sofa front and the coffee table edge, close enough to reach a glass without standing.
- Keep at least 30 inches of walkway for main traffic paths through the room, and 24 inches for a secondary path.
- Allow 24 to 36 inches between the coffee table and a media console so nobody sidesteps to change a plug.
- Size end tables so the top lands within two inches of the sofa arm height, above or below, never dramatically off.
Here is the measuring habit our design team uses that almost nobody does at home: measure your sofa seat height while someone is sitting on it, not while the cushion is fully lofted. A soft down-blend cushion compresses two inches or more under an adult, and the table height that looked correct against an empty sofa in the showroom sits noticeably high once the room is actually in use.
Sectionals, Chaises, and Small Rooms
Standard rules need adjusting for a sectional. Measure from the front of the longest run rather than treating the whole L as one sofa, and remember that a chaise projects into the room and eats the clearance a rectangle would have used. Many sectional owners are better served by two smaller tables or a nesting pair than by one oversized cocktail table, since the pair can shift for traffic and slide together when the room fills up.
Shape matters too. Rectangular tables suit long sofas and rectangular rugs. Square tables work in front of an L-shaped sectional corner. Round and oval shapes remove the corner that catches a hip in a narrow walkway, which is why they are the common recommendation for apartments, tight rooms, and homes with toddlers. Whatever shape you choose, tape the full footprint on the floor first, including both end tables, and walk the room for a day before ordering.
Read More: 6 Leather Sectional Sofas for Every Style | What Should I Look for in a Reclining Sectional?
Materials and Finishes: Wood, Metal, Glass, Marble, and Stone Looks

Material choice determines how a table set looks on day one and how it looks in year five, and those are two different questions.
Solid wood is heavy, repairable, and ages into character. It also moves with humidity and shows dents from real life, which some households love and others do not. Engineered wood with a veneer or a printed laminate top is lighter, more dimensionally stable, and often carries a tougher topcoat than solid wood does, which makes it a practical family room choice.
Metal bases add strength without visual bulk and take a beating without complaint. Tempered glass tops keep a small room feeling open because you see the rug through them, and they wipe clean instantly, but they show fingerprints, dust, and dog nose prints within hours of cleaning. Natural marble is beautiful and genuinely demanding, since it etches from citrus, wine, and vinegar even when sealed, and it stains from oil. Stone-look ceramic and sintered surfaces deliver that appearance with far more resistance to heat, scratches, and acid.
Care Expectations by Material
- Solid wood: Coasters and felt pads, no standing water, and a periodic wax or polish appropriate to the finish.
- Veneered and engineered wood: Wipe with a barely damp cloth, avoid soaking edges and seams, and skip ammonia cleaners.
- Tempered glass: Plan on cleaning it far more often than you expect, and use a streak-free cleaner rather than dish soap.
- Natural marble: Seal it, wipe spills immediately, and accept that some etching is part of owning stone.
- Stone-look ceramic: Nearly maintenance free, which is why it has taken over so much of the family-friendly market.
Base construction changes both legroom and how heavy the piece feels. A pedestal or drum base clears the floor for feet and a robot vacuum, a trestle base anchors a long table visually, hairpin and thin metal legs almost disappear in a small room, and a waterfall or plinth base reads as solid and modern but is the heaviest option to move and to look at.
Read More: The Timeless Appeal of Wood Dining Tables | Which Couch Fabric Really Holds Up to Dogs?
Matching a Living Room Table Set to Your Decorating Style
Naming your style before you shop makes every other decision faster. Here are the visual cues that define the families you will actually encounter.
- Modern and contemporary: Clean rectangles, minimal ornament, glass or smooth solid tops, chrome or matte black metal, no visible hardware.
- Mid century modern: Warm walnut tones, tapered round legs, gentle curves, low profiles, and very little visual bulk.
- Modern farmhouse: Light or whitewashed wood, plank tops, turned or X-shaped bases, matte black or aged bronze hardware.
- Transitional: Straight lines softened by a curve or a molded edge, mid-tone woods, brushed nickel, the safest bridge between traditional and modern rooms.
- Industrial: Dark or reclaimed-look wood with black metal frames, exposed bolts, caster wheels, and a heavier stance.
- Coastal: Light woods, white finishes, woven textures, open bases, and an airy feel overall.
- Rustic: Rough-sawn textures, live edges, heavy timber proportions, and visible knots and grain.
- Glam: Mirrored or glass tops, marble, gold or brass metal, and sculptural bases that draw the eye.
Coordinating With What You Already Own

Match the table set to your flooring undertone before you match it to the sofa. Warm oak floors fight cool gray tables in a way photos rarely capture, while a table set in the same temperature family settles in immediately. For metal finishes, designers commonly work in a rough two-to-one ratio, meaning one dominant metal across the room and one secondary metal used two or three times as an accent, rather than an even split that reads as indecision.
Mixing wood tones works when the tones are clearly different rather than nearly the same. A light oak table set against a walnut media console looks deliberate. That same set against a slightly-warmer oak console looks like a mistake. In an open-concept great room where the living area is visible from the kitchen, repeat one element across the two zones, such as the metal finish or the wood temperature, and let everything else differ.
Naming Your Own Style
If you are not sure which family is yours, look at the three things in your home you would never replace. Count the straight lines against the curves, the warm tones against the cool ones, and the shiny finishes against the matte ones. Whichever side wins each count is your style, and a living room table set that agrees with those three answers will look right the day it arrives.
Living Room Table Set Styles and Materials Compared
Read this table by the row that matches how your household actually lives, then confirm the style fits. Durability and storage are the two columns that predict long-term satisfaction most reliably.
| Set Category | Typical Pieces | Dominant Materials | Kid and Pet Friendly | Storage | Price Tier |
|---|---|---|---|---|---|
| Solid wood traditional or farmhouse | 3-piece cocktail and two ends | Solid or veneered wood | Good, hides minor wear | Shelves, some drawers | Mid-range to premium |
| Mid century modern wood | 3-piece, low profile | Walnut-tone wood, tapered legs | Fair, shows scratches | Usually open shelf only | Mid-range |
| Industrial wood and metal | 3-piece, heavier stance | Dark wood with black metal | Very good, built tough | Lower shelf, occasional drawer | Entry to mid-range |
| Glass and metal contemporary | 3-piece with glass tops | Tempered glass, chrome or black metal | Fair, needs constant cleaning | Glass lower shelf | Entry to mid-range |
| Marble or stone-look | 2 or 3-piece statement set | Natural stone or ceramic | Good on ceramic, poor on marble | Minimal | Premium |
| Lift top or storage-focused | 3-piece with working coffee table | Engineered wood, metal hardware | Excellent, contains the mess | Highest in the category | Mid-range |
For most family rooms, the deciding factor turns out to be storage rather than style, since a table that swallows remotes, chargers, and blankets changes daily life more than a finish ever will.
Storage, Lift Tops, and Nesting Sets for Small or Hardworking Spaces
Occasional tables have quietly become the storage furniture of the modern living room, especially in homes without a formal media console or a hall closet near the seating.
Lift top coffee tables raise the surface to roughly laptop and dinner height and usually hide a compartment underneath. They serve people who work from the sofa, families who eat in front of a game, and anyone whose living room doubles as a home office. Tables with drawers keep remotes, controllers, chargers, and coasters out of sight. A lower shelf holds baskets, board games, and folded throws. Nesting sets flex outward when company arrives and tuck back to a single footprint on a normal Tuesday. Ottoman-style soft tops with a serving tray add a place to put your feet and one more seat when the room fills.
Judging a Lift Top Mechanism
- Lift the top fully and let it settle. It should rise smoothly and hold at height without drifting down.
- Watch the hinge arms. Heavier gauge steel and welded joints outlast thin stamped hardware every time.
- Check the fit of the top when closed, since a mechanism that leaves an uneven gap on day one will only worsen.
- Confirm the table still feels stable when the top is raised and loaded, which is when leverage works against a light base.
There is a real trade-off worth naming. Hidden storage adds visual weight, because a table with a drawer bank and a full lower shelf becomes a solid block in the middle of a small room, while an open-base table lets your eye travel to the rug and makes the same square footage feel larger. In a room under roughly 12 by 14 feet, choose one storage-heavy piece and keep the end tables open, rather than making all three pieces solid.
Living Room Table Set Pros and Cons Every Shopper Should Know
Buying a coordinated set is the fastest path to a finished-looking room, and it also locks in a decision that individual purchases would leave open. Both of those are true at the same time, and which one matters more depends on how settled your room already is.
Pros
Instant style cohesion
Finish, hardware, edge profile, and leg shape all agree, which is the single biggest reason a room reads as designed.
Better value than buying separately
A three-piece set almost always costs less than the same three tables purchased individually over two years.
Proportions scale correctly
Manufacturers size end tables to their matching cocktail table, so heights and visual weight relate properly out of the box.
One decision instead of five
You choose once rather than second-guessing a third table against two you already own.
Simpler delivery and setup
Everything arrives together, gets placed in one visit, and the packaging leaves with our crew.
Cons
A fully matched look can feel flat
Without one contrasting piece, a large room can read like a furniture display rather than a home.
Less flexibility if the room changes
A set sized to your current sofa may not proportion correctly if you switch to a sectional or move to a different room shape.
Read More: The Definitive Guide to Buying Sectional Sofas & Couches | Other Furniture Stores in Bakersfield vs Urner’s: 8 Reasons to Shop Local
Quality, Assembly, and Care Tips That Make a Table Set Last
Construction quality shows up in a handful of places you can check in about two minutes. Look at how the top meets the base, since mortise-and-tenon or dowel-and-corner-block joinery outlasts staples and glue alone. Open a drawer fully and let it go, because good glides run smooth and stop soft while cheap ones rattle and drop. Lift a corner to feel hardware weight, then push down on a table corner with real pressure and watch for flex or wobble. Run a hand along the edges, where finish consistency and edge banding quality tell you how the whole piece was built.
Assembly expectations vary. Some sets arrive fully assembled, many arrive with legs and hardware to attach, and flat pack sets require complete assembly. Professional delivery and setup means our crew brings the pieces in, assembles what needs assembling, levels them, places them where you want them, and removes every box and every piece of foam.
Care by Material and Setting
- Use coasters everywhere and felt pads under every lamp, tray, and decorative object.
- Keep tables out of direct afternoon sun, which fades wood finishes and yellows white and light painted surfaces.
- Skip ammonia and bleach cleaners on wood and stone, and never use a glass cleaner on a marble top.
- Re-tighten leg and base hardware every six months, since seasonal movement loosens joints in every home.
- Match rug and floor protection to your surface, using felt glides on hardwood and tile and wider glides on carpet so legs do not sink and dent.
Warranty coverage on occasional furniture typically runs one year on materials and workmanship, with protection plans available separately that cover accidental damage such as rings, chips, and specific stains. Read what the plan excludes before you buy it, since ordinary wear is usually not covered by either.
Before Delivery Day
- Measure the narrowest doorway on the path, plus any turn at the top or bottom of a stairwell.
- Confirm elevator depth and door width for apartment and condo deliveries.
- Clear the room and remove the old tables in advance so the crew can place the new set directly.
- Decide where the rug goes first, since moving a rug under a fully placed set is far harder than doing it in order.
Valley Sun, Tile Floors, and Great Rooms: Choosing Tables for a Bakersfield Home
Central Valley houses put a specific kind of pressure on occasional furniture, and it is not the pressure national buying guides describe. Bakersfield and Fresno homes are built around big west-facing sliders and tall windows, and the afternoon sun that pours through them from May through September is strong enough to lighten a walnut finish and yellow a white painted top within a couple of seasons if a table sits in the beam every day. Most of those homes also run tile or luxury vinyl through the great room rather than carpet, which means table legs slide instead of gripping, and a heavy cocktail table dragged an inch to vacuum can leave a mark on the floor rather than on itself. Add the fine valley dust that finds its way inside no matter how new the windows are, and high-gloss and glass tops need wiping every day or two instead of every week.
- Place light-finished and painted sets on the shaded side of the room, and use cellular shades or a sheer on the west slider during peak afternoon hours.
- Favor stone-look ceramic and durable topcoats over natural marble in rooms that get direct sun and heavy use.
- Add felt glides to every leg on tile and vinyl floors, and check them twice a year since they wear flat and start scratching.
- Choose matte and low-sheen finishes for great rooms, because dust is far less visible on them than on gloss and glass.
- Size for the open great room as a whole, not for the seating alone, since these floor plans have traffic crossing from the kitchen to the patio door.
- Consider a lift top or storage set if your living room opens to the kitchen, where clutter on the coffee table is visible from every angle.
The Best Living Room Table Sets You Can Shop at Urner’s
These seven sets cover the style families and use cases described above, from a contemporary glass and chrome group to a farmhouse-friendly white set and a warm two-piece for smaller rooms. Note the piece counts, since most of these are three-piece groups and one is a two-piece, and note the base styles, since that is what decides how heavy each set feels in a room. Every one of them is available through our showrooms with delivery and setup handled by our own team.
New Classic® Home Furnishings Bella 3-Piece Gray Counter Sofa Table Set

Open great rooms with a floating sofa are where this group earns its keep. Rather than a low cocktail table, the Bella set is built at counter height to sit behind or beside seating, which turns dead space into a real serving and gathering surface when a room opens to the kitchen. The gray finish is a cool neutral that bridges transitional and contemporary rooms without committing to either. Three pieces arrive coordinated, so the tone and profile agree from the start. Best for entertainers whose living room and kitchen share one open floor plan.
Top Features
- Counter-height sofa table format: A taller surface for serving and gathering rather than a low coffee table.
- Three coordinated pieces: Finish, profile, and scale are matched by the manufacturer out of the box.
- Cool gray finish: A flexible neutral that works with both warm and cool room palettes.
- Built for open floor plans: Designed to work behind or beside floating seating in a great room.
Signature Design by Ashley® Noorbrook 3-Piece Black/Pewter Occasional Table Set

Industrial and modern rooms with a darker palette get a strong anchor here. The Noorbrook group pairs black with a pewter tone, which gives the set more depth than a flat black finish and lets it read as intentional next to stainless, chrome, or matte black fixtures elsewhere in the room. Darker finishes are also the most forgiving in a household with kids and pets, since minor marks disappear rather than announcing themselves. Three coordinated pieces cover the cocktail table and both ends. A practical pick for a family room that leans contemporary or industrial.
Top Features
- Black and pewter two-tone: Adds visual depth that a single flat black finish cannot deliver.
- Three-piece coordinated group: One cocktail table and two matching end tables sized to relate properly.
- Forgiving dark finish: Everyday marks and dust are far less visible than on light or glossy tops.
- Industrial and modern fit: Coordinates naturally with black metal, chrome, and stainless accents.
Signature Design by Ashley® Mallacar 3-Piece Black Occasional Table Set

Sometimes the right table set is the one that gets out of the way. The Mallacar group goes all in on black, which lets a bold sofa, a patterned rug, or a gallery wall carry the room while the tables recede into it. That restraint is exactly what a busy space needs, and black is the single most forgiving finish for fingerprints and scuffs from small hands. Three pieces keep the cocktail table and end tables consistent. A smart choice for renters, first apartments, and any room where the seating is the statement.
Top Features
- All-black finish: Recedes visually so bolder furniture, art, or rugs can lead the room.
- Three-piece set: A complete surface plan for a standard sofa layout in one purchase.
- Low-maintenance surface: Hides scuffs and everyday marks better than light or glossy finishes.
- Broadly compatible styling: Works in modern, industrial, and transitional rooms without competing.
Signature Design by Ashley® Hollynyx 3-Piece Glass Top Occasional Table Set with Chrome Base

Small living rooms that need to feel bigger should start with glass. Because you see the rug and the floor straight through the tops, the Hollynyx group takes up physical space without taking up visual space, which is the trick that makes a tight apartment or a narrow room breathe. The chrome base adds a bright reflective note that suits contemporary and glam rooms and pairs well with polished nickel lighting. Plan on wiping the tops often, since glass shows every print. Ideal for a contemporary room where openness matters more than storage.
Top Features
- Glass tops: Keep sightlines open so a small room reads larger than its square footage.
- Chrome base: A bright, reflective metal that suits contemporary and glam palettes.
- Three coordinated pieces: Cocktail and end tables designed as a matched group.
- Minimal visual weight: The lightest-looking option in this lineup for tight floor plans.
Signature Design by Ashley® Donnesta 3-Piece White Occasional Table Set

Coastal and modern farmhouse rooms live on light finishes, and this three-piece white group delivers that brightness across all three surfaces at once. White tables bounce light around a room and pair naturally with woven textures, linen upholstery, and light flooring, which is the exact palette so many valley homes are decorated around right now. Keep this set out of a direct west-facing sun beam and use coasters faithfully, since light tops show rings more readily than dark ones. Well matched to a bright, airy living room with soft neutral seating.
Top Features
- Bright white finish: Reflects light and keeps a room feeling open and current.
- Farmhouse and coastal fit: Pairs naturally with linen, rattan, woven texture, and light flooring.
- Three-piece coordination: A consistent white across the cocktail table and both end tables.
- Neutral foundation: Lets colorful pillows, art, and rugs change with the seasons without clashing.
Signature Design by Ashley® Wadeworth 3-Piece Two-Tone Occasional Table Set with Black Base

Transitional rooms that need to bridge warm wood and black metal have a natural answer here. The Wadeworth set combines a two-tone top treatment with a black base, which means it can pick up wood tones from your floors and cabinets while agreeing with black window frames, lighting, and hardware in the same glance. That dual reference is what makes a set work in an open floor plan where the living room borrows finishes from the kitchen. Three pieces keep the look consistent. A strong fit for a modern farmhouse or transitional great room.
Top Features
- Two-tone construction: References both wood tone and black metal, bridging finishes already in the room.
- Black base: Coordinates with black lighting, window frames, and cabinet hardware.
- Three-piece group: Complete cocktail and end table coverage in one coordinated purchase.
- Transitional versatility: Comfortable in farmhouse, transitional, and lightly industrial rooms.
Signature Design by Ashley® Zendex 2-Piece Dark Brown Occasional Table Set

Not every room has space for three tables, and this is the honest answer for the ones that do not. The Zendex group is a two-piece set in a warm dark brown, which suits a loveseat, an apartment living room, or a room where one wall is already occupied by a console or a bookshelf. Dark brown is the most traditional and most flexible wood tone in this lineup, comfortable in rustic, traditional, and transitional rooms alike. Buy this one when you need coordinated surfaces without crowding the floor plan.
Top Features
- Two-piece configuration: The right piece count for apartments, loveseats, and tighter floor plans.
- Warm dark brown finish: A traditional, flexible wood tone that works across several style families.
- Coordinated pair: Matching finish and profile without committing to a full three-table footprint.
- Space-conscious choice: Leaves room for a console, bookshelf, or reading chair elsewhere in the room.
Bring It All Together With the Right Living Room Table Set
Measure to your sofa first, choose materials that match how your household actually uses the room, then pick the style family that ties your existing floors, seating, and metals together. Do those three in that order and the table set nearly chooses itself, which is a much better outcome than falling for a finish that will not survive a valley summer or a table that sits four inches too low.
See them in person. Shop living room table sets online at Urner’s or visit our Bakersfield or Fresno showrooms to compare finishes under real light, feel the difference between a solid top and a veneer, and check drawer glides and lift top hardware with your own hands. Our design team helps you size to your sofa, our own crew handles professional delivery and setup and takes the packaging with them, and our service department is local years after the sale. That is a different experience from judging a finish by a photo on a screen and meeting a flat pack box at the curb.
Frequently Asked Questions about Living Room Table Sets
A coffee table should measure roughly one half to two thirds the length of your sofa, which puts most standard 84-inch sofas with a table in the 42 to 56 inch range. Going shorter than half leaves the table looking undersized and stranded, while going longer than two thirds crowds the seating and makes the room feel tight even when walkways technically meet clearance guidelines.
The coffee table top should sit level with the sofa seat cushion or one to two inches below it, and end tables should land within about two inches of the sofa arm height. Measure the seat while someone is sitting on it rather than fully lofted, since soft cushions compress noticeably and change the height that actually matters in daily use.
No, coffee tables and end tables do not have to match, and many well-designed rooms deliberately mix them. Buying a coordinated living room table set simply removes the risk of near-misses in wood tone and finish sheen, and the strongest mixed rooms pair a matched set with one clearly contrasting accent piece rather than three pieces that almost agree.
Most living room table sets include three pieces, meaning one coffee or cocktail table plus two matching end tables. Two-piece sets are common for apartments and smaller rooms, and larger occasional collections extend the same finish to sofa tables, consoles, chairside tables, and nesting pieces you can add later.
Engineered wood with a durable topcoat, stone-look ceramic, and darker wood finishes hold up best in homes with kids and pets, since all three hide minor marks and resist stains well. Natural marble is the most demanding option because it etches from citrus and wine, and tempered glass is safe but shows fingerprints and nose prints constantly.
A round coffee table is usually the better choice for a small living room, because removing the corners widens tight walkways and eliminates the edge that catches a hip or a shin. Rectangular tables give you more usable surface area for the same footprint, so choose one only when the room has a long sofa and enough clearance for the corners.
Why Trust Urner's and Urner's Mattress?
Urner’s started on the back of a bicycle - yup! A bicycle! David E. Urner, a local high school teacher, who spent his summer months selling Wear Ever cookware off the back of a bicycle (think 100+ degrees). David teamed up with another local teacher, Errol P. Janes to create “a new type of store – one that would cater exclusively to providing an easier way of living for the women of Kern County”, and on September 19, 1919, Home Appliance Store was opened to the public. The store boasted a rather impressive selection of “modern” appliances, including a washing machine, a freezer, a gas range, an automatic dishwasher, and an assortment of small appliances. Since then, Urner’s has expanded selections to appliances, furniture, mattresses and cabinetry!
For nearly one century, the Urner family and Urner’s business have both been an integral part of Bakersfield and Kern County, with contributions to community (Better Business Bureau, Sister City Projects, Bakersfield Symphony), charity (Ronald McDonald House, St. Jude’s Dream Home, House of Hope) and education (CSU Bakersfield, Ray Dezember Leadership Development Center. Explore the website, visit the store, or join us socially. We’re all about home, all about fun, and all about you… and we’re ready to make you a part of the Urner’s family today.
Shop Refrigerators at Urner’s
Stop by any of the 6 Urner’s and Urner’s Mattress locations in Bakersfield, CA to see what a difference buying local with an experienced staff can make. Our friendly experts are always happy to help you explore the best dining room cabinets for your living room — whether you call us at 661-396-8400, use our online chat feature, or visit us in person.



